    |
-
Bosch Rexroth
- Bosch Rexroth Pumps
- Bosch Rexroth Motors
- Bosch Rexroth Cylinders
- Bosch Rexroth On/Off Valves
- Bosch Rexroth Proportional, High-Response and Servo-Valves
- Bosch Rexroth Electronics
- Bosch Rexroth Control Blocks and Plates
- Bosch Rexroth Accumulators and Accessories
- Bosch Rexroth Power Units and Accessories
- Bosch Rexroth Filters
- About BOSCH REXROTH
- Carr Lane
-
Enerpac
- Enerpac Cylinders, Lifting Products and Systems
- Enerpac Hydraulic Pumps and Valves
- Enerpac System Components
- Enerpac Hydraulic Presses
- Enerpac Pullers
- Enerpac Specialty Tools and Sets
- Enerpac Bolting Tools
- Enerpac Workholding
- Enerpac Concrete Stressing Products
- Enerpac Rail Maintenance Equipment
- About ENERPAC
- Heypac
-
Hydac
- Hydac Filters
- Hydac Accumulators
- Hydac Cooling Systems
-
Hydac Valves, Clamps & Accessories
- Hydac Pipe Mounting Technology
- Hydac Gauge Isolators
- Hydac Tank Level Gauges
- Hydac Ball Valves - 2 Way
- Hydac Ball Valves - 3 Way and 4 Way
- Hydac Ball Valves - Actuated
- Hydac Ball Valves - Electrical Monitoring
- Hydac Ball Valves - Handles
- Hydac Ball Valves - Compatibility
- Hydac Bell Housings
- Hydac Quick Release Couplings
- Hydac Pressure Test Points
- Hydac Tank Sets
- Hydac Electronics - Diagnostics
-
Hydac Compact Hydraulics
-
Hydac Pressure Control
- Hydac Pressure Relief - ISO Cartridges
- Hydac Pressure Relief - ISO Cartridges Proportional
- Hydac Pressure Relief - SAE Cartridges
- Hydac Pressure Relief - SAE Cartridges Proportional
- Hydac Pressure Reducing / Relieving - ISO Cartridges
- Hydac Pressure Reducing / Relieving - ISO Cartridges Proprotional
- Hydac Pressure Reducing / Relieving - SAE Cartridges
- Hydac Pressure Reducing / Relieving - SAE Cartridges Proportional
- Hydac Pressure Sequence
-
Hydac Flow Control
- Hydac Needle / Flow Control - ISO Cartridge
- Hydac Needle / Flow Control - SAE Cartridge
- Hydac Flow Control, Pressure Compensated - ISO Cartridge
- Hydac Flow Control, Pressure Compensated - SAE Cartridge
- Hydac Needle / Flow Control - Line Mounted
- Hydac Needle / Flow Control - Manifold Mounted
- Hydac Flow Control Pressure Compensated - Line & Manifold Mounted
- Hydac Flow Divider
-
Hydac Check and PO Check, Hose Burst and Load Control
- Hydac Check - ISO Cartridge
- Hydac Check - SAE Cartridge
- Hydac Check - Line & Manifold Mounted
- Hydac Check, Pilot Operated - ISO Cartridge
- Hydac Check, Pilot Operated - SAE Cartridge
- Hydac Hose Break - ISO Cartridge
- Hydac Over-Centre / Counterbalance - ISO Cartridge
- Hydac Over-Centre / Counterbalance - SAE Cartridge
-
Hydac Directional Control
- Hydac Shuttle Valves
- Hydac Directional Control, 4 Port, 3 Position - ISO Cartridge
- Hydac Directional Control, 4 Port, 2 Position - ISO Cartridge
- Hydac Directional Control, 4 Port, 2 Position - SAE Cartridge
- Hydac Directional Control, 3 Port, 2 Position - ISO Cartridge
- Hydac Directional Control, 3 Port, 2 Position - SAE Cartridge
- Hydac Directional Control, 2 Port, 2 position, Spool Type - ISO Cartridge
- Hydac Directional Control, 2 Port, 2 position, Poppet Type - ISO Cartridge
- Hydac Directional Control, 2 Port, 2 position, Seated / Poppet Type - SAE Cartridge
- Hydac Housings, Manifolds & Accessories
- Hydac Power Units and Manifold Systems
-
Hydac Pressure Control
- Hydac Fluid Service Products
- Hydac Industrial Processing
- About HYDAC
- Hyloc
- Hyquip
- Jergens
- Kostyrka
- Minibooster
- Roemheld (Hilma MTECS)
-
Roemheld (Hilma QDC / QMC)
- Hilma Hydraulics Clamping Elements - Adaptive / Stationary
- Hilma Hydraulics Clamping Elements - Adaptive / Adjustable
- Hilma Hydraulics Clamping Elements - Integrated
- Hilma Clamping Elements - Electro-Mechanical
- Hilma Clamping Elements - Mechanical
- Hilma Power Units
- Hilma Die Changing Technique
- Hilma Accessories / Spare Parts
- Hilma Clamping Hydraulics and Forces
- Hilma Grip Transfer Rail Coupling
- Hilma Rotor Locks
- Roemheld (Hilma Vices)
- Roemheld (Stark Zero Point)
-
Roemheld (Workholding)
- Roemheld Hydraulic Cylinders
- Roemheld Electric Clamping Elements
- Roemheld Hydraulic Clamping Elements
- Roemheld Hydraulic Work Supports
- Roemheld Hydraulic Valves
- Roemheld Hydraulic Pressure Generator
- Roemheld Elements for Oil Supply
- Roemheld Accessories
- Roemheld Concentric Clamping Elements
- Roemheld Hydraulic Fixture Clamps
- Roemheld Pneumatic Elements
- Roemheld Handling Technology
- Roemheld Assembly Tables
- Roemheld Drive Technology
- Roemheld Press Technique
- Roemheld Technical Information
- About ROEMHELD
- Spill Hound
Bosch Rexroth Check valves
-
Bosch Rexroth On/off valves: Check valves of sandwich plate design Z1S ... moreOn/off valves: Check valves of sandwich plate design Z1S
On/off valves:
Check valves of sandwich plate design Z1S
- Sizes NG6 to 32
- Porting pattern according to DIN 24340 form A and ISO 4401
- Various isolating functions
- Various cracking pressures
- Measuring connections on inquiry
- Corrosion-resistant design on inquiry
- Nominal size 6 (component series 4X): • Check valve made of carbon fiber reinforced plastic • Improved tightness as compared with previous version with metal seal • Excellent compatibility also when using special media
- Size 10 (component series 3X): Optionally with • Metal seal ("-") • Soft seal ("W4") (Please note restrictions with regard to flow volume!)
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Check valves S ... moreOn/off valves: Check valves S
On/off valves:
Check valves S
- Nominal sizes 6 to 150
- For threaded connection
- Leak-free isolation in one direction
- Various cracking pressures
- Optional surface coating
- Special media (e.g. emulsion, water) on request
- Corrosion-resistant design on inquiry
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Cartridge check valves M-SR ... moreOn/off valves: Cartridge check valves M-SR
On/off valves:
Cartridge check valves M-SR
- Nominal sizes 6 to 150
- For block installations: • right-angled valve ("KE") • straight valve ("KD")
- Leak-free isolation in one direction
- Plug screw with pipe thread or metric ISO thread
- Various cracking pressures
- Special media (e.g. emulsion, water) on request
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Hydraulically piloted-to-open check valves in sandwich plate design Z2S ... moreOn/off valves: Hydraulically piloted-to-open check valves in sandwich plate design Z2S
On/off valves:
Hydraulically piloted-to-open check valves in sandwich plate design Z2S
- Sizes NG6 to 32
- Porting pattern according to DIN 24340 form A and ISO 4401
- For the leak-free isolation of one or two consumer ports
- Various cracking pressures
- With external actuation, optional
- With optional pre-decompression (only NG6)
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Hydraulically piloted-to-open check valves in sandwich plate design (210 bar version) Z2SRK ... moreOn/off valves: Hydraulically piloted-to-open check valves in sandwich plate design (210 bar version) Z2SRK
On/off valves:
Hydraulically piloted-to-open check valves in sandwich plate design (210 bar version) Z2SRK
- Sizes NG6 to 10
- Porting pattern according to DIN 24340 form A and ISO 4401
- For the leak-free isolation of two consumer ports
DATASHEET -
Bosch Rexroth On/off valves: Hydraulically piloted-to-open check valves SV and SL ... moreOn/off valves: Hydraulically piloted-to-open check valves SV and SL
On/off valves:
Hydraulically piloted-to-open check valves SV and SL
- Nominal sizes 6 to 150
- For subplate mounting ("P"): • NG6: Porting pattern to ISO 4401 • NG10 to 32: Porting pattern to ISO 5781
- For threaded connection ("G") (NG10 to 32)
- For flanged connection ("G") (sizes 52 to 150 only)
- With optional external leakage oil port (NG6 to 10)
- With optional pre-decompression (nominal sizes 10 to 150 only)
- Various cracking pressures
- With position switch, on inquiry
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Hydraulically piloted-to-open check valves KED ... moreOn/off valves: Hydraulically piloted-to-open check valves KED
On/off valves:
Hydraulically piloted-to-open check valves KED
- Size NG2
- For block installations
- Leak-free isolation in one direction
- Pilot-to-open
- Various cracking pressures
- With leakage port
DATASHEET -
Bosch Rexroth On/off valves: Check valve, pilot-to-close KGD ... moreOn/off valves: Check valve, pilot-to-close KGD
On/off valves:
Check valve, pilot-to-close KGD
- Size NG2
- For block installations
- Leak-free isolation in one direction
- Pilot-to-close
- Various cracking pressures
DATASHEET -
Bosch Rexroth On/off valves: Shut-off valves in sandwich plate design Z4WEH, Z4WH and Z4WE ... moreOn/off valves: Shut-off valves in sandwich plate design Z4WEH, Z4WH and Z4WE
On/off valves:
Shut-off valves in sandwich plate design Z4WEH, Z4WH and Z4WE
- Sizes NG6 to 25
- Directional spool valve, direct or pilot operated
- Porting pattern according to ISO 4401
- Functioning as shut-off through valve or shut-off short-circuit through valve
- Electrohydraulic actuation (type Z4WEH), hydraulic actuation (type Z4WH)
- Wet-pin DC solenoid
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET -
Bosch Rexroth On/off valves: Pre-fill valves ZSF and ZSFW ... moreOn/off valves: Pre-fill valves ZSF and ZSFW
On/off valves:
Pre-fill valves ZSF and ZSFW
- Sizes NG32 to 160
- Hydraulically piloted-to-open pre-fill valve (check valve) in sandwich plate design for: • Flanged connection • In-line installation
- Optional: • Unloading via built-on directional valve (type ZSFW), some versions with HD port and pre-decompression
- Use with flame resistant hydraulic fluids HFC (separate conditions of use)
DATASHEET
RE21534.pdf+44 (0)1204 699959
© 2001-2013 Hyquip Limited Intranet