• Digital closed-loop control electronics with NC functionality
• The digital axis control HNC100-3X is a programmable NC control for up to four closed-loop controlled axes. It meets the specific requirements for controlling hydraulic drives.
• With regard to immunity to interference, resistance to mechanical vibration and shock and thermal strength, the HNC100 is designed for use in harsh industrial environments.
• Hydraulic axes
  • Measuring system:
    • Incremental or absolute (SSI)
    • Analog 0 ± 10 V and 4 to 20 mA
  • freely configurable controller variants
    • Positions/ pressure/ force/ velocity controllers
    • Position-dependent braking
    • Alternating control (position/pressure)
    • Control of synchronization groups of up to four axes
• Programming
  • NC language with subroutine technique and conditional jumps
• Engineering and commissioning
  • WIN-PED® 6
• Process interfacing
  • Digital and analog inputs and outputs
  • PROFIBUS DP for communication with a higher-level control
• Mounting
  • DIN C carrier rail 35mm

• Command value and controller card for one closed control loop
• Freely configurable command value and controller cards
• Digital assemblies in Eurocard format
• Use as command value card for generating, linking and normalizing signals
• Use as controller card for 2 closed control loops (VT-HACD-1) with PIDT1 controller and state feedback
• Alternating control possible (e.g. position control with superimposed pressure control)
• Special control algorithms for hydraulic drives
• Digital SSI position measuring system or incremental
• 6 analog inputs, voltage (±10 V, 0 to 10 V) and current (0 to 20 mA; 4 to 20 mA) can be changed over via software
• Versatile options of logic signal operations and changeover
• Possibility of sequence control through block call-ups with command values, ramp times and controller parameters
• Front display with keys for displaying and changing parameters as well as for diagnostic purposes
• PC software BODAC for configuration, parameterization and diagnostics
• Online diagnostic function
• Integrated "online manual"
• Field bus systems: Profibus

• Digital positioning card for position-dependent braking
• Digital assemblies in Eurocard format
• Position-dependent braking of a hydraulic axis
• Braking characteristics linear or root-shaped, adjustable
• Traversing profile separately adjustable for A to B and B to A
• Adjustable start-up ramp with rounding option (S-components)
• Setup mode
• Digital SSI position measuring system
• Analog inputs, voltage (±10 V, 0 to 10 V) and current (0 to 20 mA; 4 to 20 mA) can be changed over via software
• Special control algorithms for hydraulic drives
• Front display with keys for displaying and changing parameters as well as for diagnostic purposes
• PC software BODAC for configuration, parameterization and diagnostics SYS-HACD-BODAC-01
• Online diagnostic function
• Integrated "online manual"

Type VT-HACD-DPQ
Suitable for injection process

Type VT-HACD-DPC
Suitable for closing axis

• Digital injection control electronics
• Digital closed-loop control electronics in Eurocard format
• Open or closed-loop controlling of the injection process / closing axis
  • Injection control with superimposed pressure control / locking the form
  • Pack-and-hold pressure / building up the locking force
  • Backpressure / holding the locking force
  • Worm withdrawal / opening the form
• Command value specification
  • Analog
  • Command value profile
• Sensor interfaces
  • Analog
  • Absolute position measuring system SSI
  • PC software BODAC for configuration, parameterization and diagnostics
• Online diagnostic function
• Integrated "online manual"

• Digital multi-axis NC control
• Control of 2 to 32 electrohydraulic or electromechanical axes, programmable as desired
• Interconnectable to further MAC8 units via local Ethernet
• Communication with the higher-order control via Profibus-DP®, CAN or Ethernet
• Special hydraulic control characteristics and PLC functionality for independent control of machines or machine parts
• Various process connection options
• User programming with PC
• Fields of application:
  • Presses
  • Materials handling
  • Steelwork and rolling mill technology
  • Testing technology
  • Special machines

• Digital closed-loop control electronics with NC functionality
• The digital VT-HNC100-2X axis control is a freely programmable, bus-capable NC control for controlling one or two electrohydraulic or electromechanical drives
• Freely configurable control variants
• Position controller (PDT1) with zero point compensation, overlap jump for proportional valves, command value feedforward and state feedback
• Position-dependent braking
• Velocity controller
• Pressure/force controller (PIDT1) with differential pressure evaluation, pressure limitation and alternating control
• Synchronization control of 2 axes
• Flexibility: NC programming of motion sequences